Home Products Applications Support News About Contact

Xtender Brochure

 

Spectral Imaging Systems

Multichannel imaging systems

Adapters

Contact us for more information

adapters Imaging Systems
Xtender
Collimated Emission-Port Adapter

Two-piece optical adapter creates collimated space at emission port of microscope, thus allowing addition of other optical devices without sacrificing performance or introducing optical aberrations

For many imaging applications, it is necessary to utilize devices such as filter wheels and LCTFs on the emission port of a microscope. The beam emerging from the microscope emission port, however, is coming to a focus. Optical devices are often placed in the focusing beam, thereby producing a series of errors, including:

Parfocality
Anytime a flat piece of glass (e.g., an emission/barrier filter) is inserted in a focusing beam, the beam will no longer focus at its original location; instead, the location of the focal plane will be shifted. The amount of shift will depend on the thickness of the filter as well as the index of refraction of the glass used to make the filter. This focal-shift error destroys parfocality between the detector and the eyepiece. However, when collimated light passes through an emission filter, the focal plane is not shifted.



Bandpass Variation
It is a well-known fact that the bandpass of a filter varies with the angle at which light hits it. When a filter is placed in a focusing beam, the light at the edge of the beam hits the filter at a different angle than the light at the center of the beam.  As a result, there is a variation in the center wavelength (CWL) of the filter bandpass for different parts of the beam. However, when collimated light passes through a filter, all rays strike at the same angle, eliminating bandpass shift.



The Solution...